For best results, follow these simple instructions
Step 1
Ensure you have the right color by ordering a color chart at getsoto.com/colorchart.
Step 2
Clean surface with mild detergent to remove dirt, dust, grease, oil and loose paint.*
Step 3
Fill any holes, cracks or grooves with spackle prior to painting. Ensure spackle is thoroughly dry before painting.
* Always wear a dust mask when sanding. If you scrape, sand or remove old paint (pre-1978 homes), you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hot Line at 1-800-424-LEAD, or log on to www.epa.gov/lead for more info. Keep out of reach of children. Includes acrylic resin. Not for internal consumption. If ingested, do not induce vomiting. Contact medical support.
Step 4
Shake bottle for at least 10 seconds to thoroughly mix up paint.
Step 5
Apply paint over defect and feather away to blend with existing surface. Multiple coats may be required. Dry for at least one hour between coats.
Step 6
Simply clean messes with soap and water. Store in cool/dry place. Ensure lid is tightly secured. Do not allow to freeze.
